Product description

CEMENT REMOVER Cleaners.

Buy Concentrated acid-based CEMENT REMOVER cleaner for end-of-installation cleaning to remove cement residues and inorganic dirt.

CEMENT REMOVER cleaners are a concentrated acid-based cleaners specifically developed to wash and
clean after installation of flooring or coverings with cement-based grout.

The action of CEMENT REMOVER cleaner eliminates all residues of glue, grout, and varnish.

remove cement stains without Changing the color of joints and restoring the original appearance to treated surfaces.

 

It is also extremely effective when it comes to removing inorganic dirt and saline efflorescence.

End-of-installation cleaning with CEMENT REMOVER cleaner serves to prevent problems that can occur
after installation and result from a lack of correct cleanings, such as surface patina and more
easily soiled surfaces.

CEMENT REMOVER is a product that can be applied to all acid-resistant materials which need
washing at the end of the installation process or following grouting operations, carried out with
adhesives, mortar, or cement-based grout.

CHARACTERISTICS AND BENEFITS

• A versatile product, suitable for use on different types of material.
• Ready to use.
• Top-level cleaning action.
• Effective on cement-based residues.
• Quick and easy application.
• It is gentle on grout widths but effective against dirt.

USES

• This product can be used on both indoor and outdoor surfaces.
• Suitable for use on Marble-quartz agglomerate, Slate, Sandstone, Basaltina – Lava stone,
  Molten basalt, glazed ceramics, Clinker, Cotto, Granite, Lapped porcelain stoneware, Polished
  porcelain stoneware, Natural porcelain stoneware, Textured porcelain stoneware, Reconstituted
  stone (Eco stone), Porphyry, Quarzite, Terracotta, Tuff

COVERAGE

10/15 m2
/l

APPLICATION EQUIPMENT

Cloth, mop, single disc machine.

CEMENT REMOVER Cleaners – Concentrated acid-based cleaner for end-of-installation
cleaning and removing cement residues and inorganic dirt.

APPLICATION STEPS.

Preparing and cleaning the surface.

Cleaning after the installation process must be completed at least two days after grouting the
surfaces.

1. Before proceeding to wash the surface, it is advisable to clean away any surface residues,
   such as dust, debris, and coarse dirt, using a broom or a vacuum cleaner.
2. Wait for the surface to be treated to be completely dry.
3.  Any adjacent surfaces not being treated with the product must be protected.
4. Apply the product to surfaces with a temperature of between +5 and +40°C.

Application

• Before applying the product to the whole surface, always test a small, unexposed area or
  unused piece to check its suitability for use.
• Dilute the product in clean water. Pour 1 part product into 2 parts water in a bucket.
• Begin to work the product over the surface, rubbing the surface with the tool of choice.
• Leave the product to act for 5 – 10 minutes, continuing to wipe over the surface with your
  tool of choice to boost and aid the cleansing action of the product.
• After working the product, remove all residues and rinse the whole floor with plenty of water.
• If the result is only partially achieved, repeat the application process following the same steps
  and if necessary, slightly increase the concentration of the product in the water.

Drying time.

After carefully removing any residues and rinsing the surface with water, no further action or
waiting time is necessary.

Opening to floor traffic.

• After carefully removing any residues and rinsing the surface with water, the floor can be
  opened to foot traffic.
• COMPLEMENTARY CLEANING AND MAINTENANCE PRODUCTS
  After treating with CEMENT REMOVER, keep the surface clean with the most suitable Faber
  product, such as NEUTRAL CLEANER or FLOOR CLEANER, to be selected according to the
  characteristics of the surface.
  INSTRUCTIONS AND GUIDELINES
  – Wait at least 2 days after grouting before proceeding with the
  end of installation washing.
  – Never apply the product to a wet surface
  – Do not apply the product to overly heated surfaces
  – When applying to recently laid or grouted surfaces, wait for the adhesive or grout to
  cure completely.
  – Never use in conjunction with other chemical products.
  – Before applying the product to the whole surface, it is advisable to test a small,
  unexposed area or unused piece to check its suitability for use.

Cleaners
CEMENT REMOVER – Concentrated acid-based cleaner for end-of-installation
cleaning and to remove cement residues and inorganic dirt.
EQUIPMENT CLEANING
At the end of application, the equipment used can be washed using water.
SAFETY
When applying the product, always use suitable personal protective equipment and carefully
follow the instructions on the product safety data sheet.